-
Ihe nkedo nke igwe pneumatic eji arụ ọrụ Soft Seal Knife Gate Valve
Nrụgide aha:1.0Mpa 1.6Mpa
Ọkara ọdabara:mmiri ndu, mmiri dị ọcha, mmanụ
Ọkpụkpọ okpomọkụ:0 ~ 80 ℃
-
GB Cast Steel Globe Valve na Flange na-akwụsị igwe anaghị agba nchara
Nrụgide aha: 1.6MPa ~ 20.0MPa
Ọnụ ala dayameta: DN15 ~ 800mm
Okpomọkụ ọdabara: ≤540℃
Usoro njikọ: flange, ịgbado ọkụ
Ụdị draịva: akwụkwọ ntuziaka, gia spur, bevel gear, pneumatic, eletriki
Ihe a na-ahụ anya: WCB, WC6 WC9 304, 304L 316 316L
Ihe mkpuchi: alloy steel, Stelite
-
American Standard Cast Steel Globe Valve
Nrụgide aha: Klas150 ~ Klas1500
Dayameta aha: NPS2″~16″
Okpomọkụ ọdabara: ≤540℃
Usoro njikọ: flange, ịgbado ọkụ
Ụdị ụgbọala: Akwụkwọ ntuziaka, Spur Gear, Bevel Gear, Pneumatic,
Ihe Anya eletrọnịkị: WCB WCC, 304 304L 316 316L
Ihe mkpuchi: Alloy Steel, Stellite
-
Ụdị Diaphragm Mud Valve na-emepe ngwa ngwa
Ọdabara ọkara: mmiri, mmanụ
Opekempe mmeghe na mmechi nrụgide omume: 0.05MPa
Ọnọdụ okpomọkụ: 0 ℃ 80 ℃
-
Njikọ ngwụcha Wafer dị elu
Ọdabara ọdabara: mmiri ọkụ, mmiri dị ọcha, mmanụ, nsị
Ọnọdụ okpomọkụ dị:
Nitrile roba ≤ 80℃
EPDM ≤ 120℃
Fluorine roba ≤ 160 ℃ -
Valve nru ububa dayameta
Nwale nrụgide:
Shell 1.5 × PN MPa
Akara 1.1 × PN MPa
Ọnọdụ okpomọkụ kwesịrị ekwesị:
Akara dị nro ≤ 80 ℃
Akara siri ike ≤ 400 ℃Ọdabara ọdabara: mmiri, mmanụ, ikuku, adịghị ike corrosive media, wdg.
Ọnụ ala dayameta: 50mm ~ 5300mm
Nrụgide aha: 0.25MPa ~ 2.5MPa
-
Mmiri gas Steam Flanged Butterfly Valve
Ọnụ ụzọ gafere: DN150 ~ 1600
Nrụgide aha: 1.0MPa, 1.6MPa, 2.5MPa
Ọdabara ọdabara: mmiri ọkụ, mmiri dị ọcha, mmanụ, nsị
Okpomọkụ ọdabara: rọba nitrile ≤80°C EPDM ≤120°C Fluorine roba ≤160°C
Ụdị nnyefe: wheel wheel, worm gear, pneumatic, eletriki
-
Ụdị Nkuku Waterproof Hammer Air Valve
Dayameta aha aha: DN50—DN300
Nrụgide aha: 1.0Mpa, 1.6Mpa, 2.5Mpa, 4.0Mpa
Ọkara dị mkpa: mmiri ọkụ, mmiri dị ọcha, wdg.
Ọnọdụ okpomọkụ dị: 0-60 ℃
-
Multifunctional Water Pump Control Valve
Ọdabara ọdabara: mmiri ọkụ, mmiri dị ọcha, nsị, mmanụ, acid, mmiri mmiri
Ọnọdụ okpomọkụ dị: 0 ~ 80 ℃
Oge mmechi nwayọ: 3-120S (nwere ike idozi)
Hama mmiri kacha elu: ≤1.3 ugboro nke agbagoro agbagoro nke mgbapụta mgbapụta
Ogologo ngbanwe kachasị nke mgbapụta mmiri: ≤1.2 ugboro ọsọ ọsọ nke mgbapụta mmiri
-
Akwa Micro Exhaust Valve Threaded akpaaka
Nrụgide aha:1.0MPa, 1.6MPa, 2.5MPa
Ọkara ọdabara:mmiri dị ọcha, mmiri ọkụ, nsị
Ọnọdụ okpomọkụ dị:0 ~ 100 ℃
-
GB Cast Steel Gate Valve nwere Flange na-akwụsị igwe anaghị agba nchara
Nrụgide aha: 1.6MPa ~ 20.0MPa
Ọnụ ala dayameta: DN15 ~ 800mm
Okpomọkụ ọdabara: ≤540℃
Usoro njikọ: flange, ịgbado ọkụ
Ụdị draịva: akwụkwọ ntuziaka, gia spur, bevel gear, pneumatic, eletriki
Ihe a na-ahụ anya: WCB, WC6 WC9 304, 304L 316 316L ihe mkpuchi: Alloy steel, Stelite
Ngwa nhọrọ: flanges, bolts njikọ, mkpụrụ na gaskets
